|Condition:||Original New||Warranty:||12 Months|
|Shipping Term:||DHL/TNT/UPS/FEDEX Etc.|
fiber optic cable,
Ironman Technology Co.,LTD
● HONEYWELL ● AB ● OMRON ●SIEMENS ●SCHNEIDER
● ROSEMOUNT● ABB ● NOTIFIER ●MTL ● GE ●And many more !
HONEYWELL 51204037-015 CABLE SET REV A new in stock PLC cable
Lead time:3-5 days
New with one year warranty
External Installation of UCN Taps, Continued Protect taps from physical damage Taps must be protected so that they are not abused by bumping or by exposure to the elements such as water and sunlight. Allow for routing drop cables to network devices When the UCN taps are installed external to an enclosure containing the network device, the drop cables must be routed into the enclosure. That cable length cannot exceed 50 meters (164 feet). Allow for redundant cable routes Separate paths for the redundant A and B drop cables should be considered if they are in a hazardous location where they can be damaged.
Internal Installation of UCN Taps Drop taps can be mounted in TDC 3000X enclosures There are various methods of installing UCN taps in a network device enclosure, such as an Advanced Process Manager cabinet or the cabinet containing a Network Interface Module (NIM). Special tap mounting brackets are available in a kit that includes the UCN taps. Preinstalled taps and drop cables The cabinets containing the network device also can be ordered with the taps and drop cables already installed. UCN taps installed on sides of PM/APM cabinet Figure 5-3 shows the installation of the UCN taps on the brackets attached to the center cross members at the right and left sides of the Process Manager or the Advanced Process Manager cabinet. UCN trunk cable A connects to the left side trunk cable tap and trunk cable B connects to the right side trunk cable tap.