|Condition:||Original New||Warranty:||12 Months|
|Shipping Term:||DHL/TNT/UPS/FEDEX Etc.|
Ironman Technology Co.,LTD
● HONEYWELL ● AB ● OMRON ●SIEMENS ●SCHNEIDER
● ROSEMOUNT● ABB ● NOTIFIER ●MTL ● GE ●And many more !
Honeywell BC1000A0220U Burner Controller New Control Box
Lead time:3-5 days
New with one year warranty
The BC1000A/B series is a flame switch for intermittent operation to indicate presence or absence of a flame and to be applied in commercial or industrial burner installations. The BC1000A can also be used as a primary control for manually operated burner systems using a start/stop station. In addition to the flame sensing functions, the BC1000A/B provides a “Safe Start” function which checks if a flame signal is present when applying power to the device. If so, the BC1000A/B holds its operation until the flame signal disappears. The BC1000A/B can be used with a recifying flame rod or all existing non-selfcheck Honeywell “PowerTube” type UV sensors (for intermittent operation only.
The BC1000 (FR models) will operate also with the ex-Satronic IRD810/1010 range of infrared sensors. Note that this combination is NOT CE approved for use on installations that fall under the GAD (Gas Appliances Directive).
1) Compact design. 2) Plug-in wiring sub base for direct panel or DIN RAIL mounting. 3) Safe-start check (SSC) feature prevents operation when abnormal flame condition exists at start-up. 4) LED indication (Power, Flame, SSC) on the front to show operation status (SSC hidden behind the front cover). 5) Screw terminals on the front provide continuous 0~6VDC flame signal strength monitoring.
When Installing this Product… 1) Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition. 2) Check the ratings given in the instructions and marked on the product to make sure the product is suitable for the application. 3) Installer must be a trained, experienced, flame safeguard service technician. 4) After installation is completed, check out the product operation as provided in these instructions.
Contact Person: Sales Manager