|Condition:||Original New||Warranty:||12 Months|
|Shipping Term:||DHL/TNT/UPS/FEDEX Etc.|
Ironman Technology Co.,LTD
● HONEYWELL ● AB ● OMRON ●SIEMENS ●SCHNEIDER
● ROSEMOUNT● ABB ● NOTIFIER ●MTL ● GE ●And many more !
Honeywell CC-TCNT01 C301 control device bottom panel 51308307-175 REV H Card
Lead time:3-5 days
New with one year warranty
Functional Overview The EUCN provides a powerful communications platform for efficient, secure, real-time process communications. The UCN is based on IEEE 802.3 and extended message services operating in up to at a 100 megabit/second rate using efficient message structures to support the high-speed communications requirements of a process network The EUCN provides the following features: Support of redundant devices for added security Deterministic event/alarm distribution TPS Network time synchronization to enable high resolution, digital input sequence of events recording Extensive ENIM and EUCN communications and network diagnostics The EUCN uses redundant FTE cables as standard, and can accommodate up to 32 redundant devices. Devices can be added to, or removed from, the EUCN in a modular fashion to adjust to changing system requirements.
Besides full support of these special features, the EUCN also provides the applications layer necessary for a wellintegrated, high integrity, real-time process communications network. For example, the EUCN supports orderly data access of all data acquisition, control, configuration, and status parameters for both peer-to-peer and higher level communications, extensive alarm and message handling routines, on-going devices and communications diagnostics monitoring, support of high-level control with assignable control modes, plus system and device configuration support. All of these communications management functions are provided as standard with the EUCN. The EUCN supports peer-to-peer communications. This means that EUCN devices on the same logical EUCN can write data to and read data from other EUCN devices for additional control strategy flexibility and coordination.
Network Interface Module Information about the process and about the status and configuration of the EUCN devices is transferred through the ENIM from the EUCN to the TPS Network. Commands and configuration information for up to 8000 points, with up to 2400 parameters per second (K4LCN ENIM), are transferred through the ENIM from the TPS Network to the EUCN. For added flexibility, physical EUCNs can be divided into logical EUCNs by adding additional ENIMs. The additional ENIMs can be used to load level heavy loads that might exist on a single physical EUCN. The ENIM provides the protocol conversion and buffering necessary to efficiently exchange information between the devices connected to the EUCN. The ENIM broadcasts the TPS Network time to all EUCN devices, thereby synchronizing the EUCN time with the TPS Network. This supports 5 ms digital input sequence of events reports from the EUCN connected devices
Contact Person: Sales Manager