|Condition:||Original New||Warranty:||12 Months|
|Shipping Term:||DHL/TNT/UPS/FEDEX Etc.|
battery extension module,
fc sdo 0824
10300/1/1 24 Vdc to 5 Vdc/12 A converter Description The supply voltage of the FSC system is 24 Vdc, which can be powered from the plant's 24 Vdc supply system with battery back-up. The FSC system uses an internal 5 Vdc to power the FSC modules. The 10300/1/1 DC/DC converter provides the internal 5 Vdc with galvanic isolation between the two supply voltages.
Note: Keep 10300/1/1 modules off-line for at least 30 seconds after being on-line. 10300/1/1 modules have an NTC resistor as an inrush current limiter. Replacing (or repowering) the module within 30 seconds after removal (or power-off) may cause a supply voltage dip which may trip the system (because the NTC resistor did not yet cool down sufficiently).
Notes: 1. 10300/1/1 modules without a suffix code and with suffix code 04601 have an ON/OFF input on pin d14. This pin should not be connected. 2. The 10300/1/1 module is a pin-compatible upgraded version of the GK60 module.
Note: If the 24 Vdc is supplied from an M24-20HE or M24-12HE power supply that is located in the same cabinet as the FSC system, the input filter is not mandatory. As the limits on the 5 Vdc power supply are very tight (± 5%), this module must be placed closely to the system bus (e.g. 12-SBUS). Use the sense wires correctly and use short wires of proper wire diameter to minimize voltage drop over the wiring. The minimum wire diameters for 'SUPPLY 5 VDC' and 'GND 5 VDC' to the system bus of the Central Part are as follows: • up to 8 A: 2.5 mm² (AWG 14) • up to 12 A: 6 mm² (AWG 10)
Technical data The 10300/1/1 module has the following specifications: General Type number: 10300/1/1 04603* Approvals: CE, TÜV, UL** Software versions: all Space requirements: 8 TE, 3 HE (= 8 HP, 3U) Power Power requirements: current < 3.9 A at 24 Vdc voltage 24 Vdc (–15%...+30%) Inrush current: < 18 A Environment Ambient temperature: 0°C to 60°C (32°F to 140°F) (see derating curve, Figure 3) Output Output voltage: 5 Vdc with overvoltage protection Ripple content: < 40 mV p-p (at full load) Output current: 12 A at 0°C to 45°C (32°F to 113°F) 8 A at 0°C to 60°C (32°F to 140°F) Hold-up time: ≥ 0 ms Output voltage setting (V adj): 5.00 Vdc measured across system bus connections Overvoltage protection (OVP adj): 5.75 Vdc Efficiency: ≥ 70%
Ironman Technology Co.,LTD
● HONEYWELL ● AB ● OMRON ●SIEMENS ●SCHNEIDER
● ROSEMOUNT● ABB ● NOTIFIER ●MTL ● GE ●And many more !
HONEYWELL 10300/1/1 Converter Module Card 24A 24V to 5V
Lead time:3-5 days
New with one year warranty
Contact Person: Sales Manager